Skip to content
English
Customer portal
www.uffizio.com
  • There are no suggestions because the search field is empty.

Battery Threshold

The Battery Threshold alert is triggered when an object’s battery voltage drops below a configured threshold.
This alert helps fleet managers monitor battery health, ensuring timely maintenance and preventing device shutdown due to low power.

Parameters Considered (Prerequisites)

  • Battery Sensor: Determine the battery sensor, in the Sensors tab while adding an Object. 

How to Configure

  1. Select the correct Company and Branch for whom the alert is to be configured.

  2. Based On: Choose on what you want to base the alert configuration (Object, Object Group, Object Type).

    1. Object: Select individual vehicles for whom you want the alert to generate.
    2. Object Group: Select a group of vehicles for whom you want the alert to generate.
    3. Object Type: Select vehicle or object type for whom you want the alert to generate.

  3. Select the Object based on the previous step selection.

  4. Set an Alert Name for identification of the alert.

  5. Select the Alert Type as Battery Threshold.

  6. In the Battery Threshold field, enter the percentage at which the alert should trigger.

  7. In the Text field, enter the message that will be displayed when the alert is triggered.

  8. Select the Valid Days, Everyday or Custom. 
    1. Everyday: This alert will be triggered, everyday in case of a violation in accordance to these parameters set.
    2. Custom: Mark the checkboxes of the days, when you want this alert to be triggered for. (eg., Sun, Mon and Sat)
  9. Enter the Valid Time From and To. The alert will be generated inside the time range that you have selected.
  10. Select the Timezone.
  11. Select the Severity of the alert (Low, Medium, or High).
  12. Mark the checkboxes of the medium via which you want the Action or Notification to be sent. (eg., SMS, Email or Notification)
    1. SMS: To receive an alert by SMS, enable the checkbox, enter the phone numbers.
    2. Email: To receive an alert by Email, enable the checkbox, enter the recipients of the email.
    3. Notification: To receive an alert on the system Push Notification, enable checkbox, and select the notification tone. you’ll receive notifications according to the Severity Set i.e Low, Medium or High.
  13. Click Save to save the alert configuration.

Please Note: To Receive the alert on SMS & Email, the api should be configured either on Admin, Reseller or Company.

Example

If an object’s battery falls below 20%, and the alert is configured with Battery Threshold = 20%, the system immediately sends a notification via SMS,Email or Notification. This allows the fleet manager to schedule maintenance or recharge, preventing device downtime and ensuring continuous tracking.