Alerts Description

This knowledge base article provides an overview of alerts on the platform. Find the descriptions of each alerts as below:

General Alerts

911: It is a device-specific alert triggered by the 911 emergency telephone number. Notification can be received as an action, whenever the alert is triggered.
AC Misuse: AC Misuse alert is triggered when the AC is in use during the idling of the vehicle for more than defined time. As an action when the alert is triggered, the notification can be received or you can also immobilize the vehicle. This is a configuration specific alert.
Address Overstay: Address Overstay alert is triggered when the vehicle stays in the radius of selected addresses for more than the defined time. As an action when the alert is triggered, the notification can be received or you can also immobilize the vehicle.
Air Condition: AC alert can be configured to receive alerts whenever the AC is turned ON or OFF. Notification can be received as an action, whenever the alert is triggered.
Alcohol Level Violation: This alert will be triggered whenever the alcohol level crosses the threshold defined while configuring the sensor. Notification can be received or the vehicle can be immobilized as an action, whenever the alert is triggered.
Alcohol Sensor: Alcohol Sensor alert will be triggered when the sensor is disconnected. This is a device specific alert and the notification can be received as an action whenever the alert is generated.
Authorized Break: The alert will be triggered when the vehicle fails to take the minimum required break within the set duration time. Notification can be received as an action, whenever the alert is triggered to take specific break time.
Base Location Delay: Once the object starts from the base location source, if it doesn't reach end point within the specified duration in hours. A notification action can be received whenever the alert is triggered.
Base delay Visit: Once the object departs from the base location source and fails to reach another designated point within the specified duration in hours, an alert will be triggered. Notifications can be received whenever the alert is triggered.
Battery: The battery alert will be triggered whenever the battery is plugged or unplugged. Notification can be received as an action, whenever the alert is triggered.
Battery Threshold: This alert is triggered when the battery voltage drops below a configured threshold. It notifies the user that "Battery Maintenance Required" via SMS, email, or API as configured.
Beacon: Beacon alert will be triggered whenever the beacon is connected or disconnected. Notification can be received as an action, whenever the alert is triggered.
BLE Battery Sensor: This alert is a device specific alert. The alert will be triggered whenever the battery is about to discharge and the notification can be received as an action.
BLE Missing: The BLE Missing alert is triggered when the bluetooth is not connected. This is a device specific alert and a notification can be received as an action whenever the alert is triggered.
BLE Tamper: The alert will be triggered when the bluetooth is tampered. It is a device specific alert and whenever an alert is triggered, a notification can be received as an action.
BLE Temperature Sensor: This is a device specific alert and is triggered whenever the sensor is connected. Notification can be received as an action, whenever the alert is triggered.
Boot: Boot alert can be configured to receive alerts whenever the boot's switch is turned ON or OFF. Notification can be received as an action, whenever the alert is triggered.
Charger: Charger alert will be triggered whenever the charger is connected or disconnected. Notification can be received as an action, whenever the alert is triggered.
Checkpoint halt violation: This is a job related alert. If the vehicle takes a halt for more than the time period defined for halt on checkpoints while configuring the job, then this alert will be triggered. Notification can be received as an action, whenever the alert is triggered.
Collision alarm: This is an ADAS event specific and device specific alert. The collision alarm alert will trigger an alarm in case there is a possibility of an accident. Notification can be received as an action, whenever the alert is triggered.
Convoy violation: This is alert is triggered when the convoy vehicle moves out of the tolerance set while configuring the job, for more than the time period defined. Notification can be received as an action, whenever the alert is triggered.
Crash detection: The crash detection alert is triggered when the vehicle has met with an accident. This is an event specific and device specific alert. Notification can be received as an action, whenever the alert is triggered.
Custom: This is a custom Digital Alert. The user needs to select Custom from the dropdown menu in Connected Sensor list while configuring the Object. Notification can be received as an action, whenever the alert is triggered.
Depart from Address: This alert will be triggered whenever the vehicle enters and comes out of all the selected addresses. Notification can be received as an action, whenever the alert is triggered.
Device low battery: This alert can be set when the user wants to receive a notification when the device battery is low. Notification can be received as an action, whenever the alert is triggered.
The alert can be set based on either of the following parameters:
- Event: When the user configures an alert based on event then the alert will be generated whenever the device has low battery.
- Custom: The alert will be generated whenever the device battery is lower than the battery percentage you set. To avoid false values due to fluctuations, you need to set a time period for which the battery percentage remains constant and user should receive the alert.
Diagnostic trouble codes: This alert is generated on the basis of DTC error codes. It works on vehicle CAN or OBD ports. Notification can be received as an action, whenever the alert is triggered.
Disassemble: The alert is generated whenever the device is disassembled. This is a device specific alert and notification can be received as an action, whenever the alert is triggered.
District: The alert is generated whenever the district is changed by the vehicle. This alert depends on address. Notification can be received as an action, whenever the alert is triggered.
Door: Door alert can be configured to receive alerts whenever the door is opened or closed. Notification can be received as an action, whenever the alert is triggered.
Driver drunk: This alert is generated when the driver is drunk. This alert depends on the sensor configuration done by the user. Notification can be received as an action, whenever the alert is triggered.
Driver Face-ID Authentication: The Driver Face-ID Authentication alert verifies driver identity using facial recognition when the vehicle ignition is turned on. A snapshot is taken and compared with stored Face-ID records. If the face matches, an "Authorized Driver" alert is generated; otherwise, an "Unauthorized Driver" alert is generated. The alert includes a snapshot link for verification.
Driver Swipe Missing: This alert is triggered when a journey begins without the driver's card being scanned at the start of the trip. The alert checks within a set duration (default 120 seconds) and notifies if the card is not detected.
Drop alarm: This is a device specific alert (personal trackers) and the alert is generated when the device is dropped.
Emergency Lights: This alert is triggered when the emergency lights' status changes (On/Off). It functions like the ignition alert and supports SMS, email, and API notifications. The alert can be configured to consider On, Off, or both statuses.
Engine: Engine alert can be configured to receive alerts whenever the engine starts or stops. Notification can be received as an action, whenever the alert is triggered.
Engine Temperature: This alert is triggered when the engine temperature exceeds a user-specified threshold (1°C to 130°C). The alert provides a message indicating that the engine temperature has reached its set threshold, notifying users promptly.
Enter in Geofence: This alert is generated whenever the vehicle enters in the selected geofences. This alert will only be applicable for the geofences whose category is selected as area while configuring the geofence.
External low battery protection: This alert is generated when the external battery is low. Notification can be received as an action, whenever the alert is triggered.
Eye sensor device low battery: This alert can be set when the user wants to receive a notification when the eye sensor device battery is low. This is a device specific alert and notification can be received as an action, whenever the alert is triggered.
The alert can be set based on either of the following parameters:
- Event: When the user configures an alert based on event then the alert will be generated whenever the eye sensor device has low battery.
- Custom: The alert will be generated whenever the eye sensor device battery is lower than the battery percentage you set. To avoid false values due to fluctuations, you need to set a time period for which the battery percentage remains constant and user should receive the alert.
Eye sensor humidity: This alert whenever the humididty is in defined values. This is a device specific alert and a notification can be received as a action whenever the alert is triggered.
Eye sensor idle: The alert is triggered whenever the Eye sensor is in Idling greater than the defined time period, which means the Ignition is ON but the Eye sensor is in idling. This is a device specific alert and a notification can be received as a action whenever the alert is triggered.
Eye sensor magentic field: This alert is triggered whenever there is a magnetic field detected by the Eye sensor. This alert is majorly used for construction site. It is a device specific alert and a notification can be received as a action whenever the alert is triggered.
Eye sensor movement: This alert is triggered whenever there is some movement of Eye sensor detected or not detected. This is a device specific alert and a notification can be received as a action whenever the alert is triggered.
Eye sensor temperature: This alert is triggered whenever the temperature is in defined values. It is a device specific alert and a notification can be received as a action whenever the alert is triggered.
Fall Detection: This alert is triggered when the person falls down. It is a device specific alert for the personal trackers and a notification can be received as a action whenever the alert is triggered.
Fence Overstay: The fence overstay alert is for the times when the vehicle stays in the selected geofence for more than time user defines in value. Only running vehicles will be considered for this alert. In order to consider the vehicles in stoppage, the box needs to be checked. As an action when the alert is triggered, the notification can be received or you can also immobilize the vehicle.
Free Wheeling: This alert is triggered when a vehicle is in motion with the accelerator pedal in a neutral position or low RPM (≤ 600) for more than 2 minutes. It helps detect risky downhill driving practices that can lead to vehicle breakdowns.
Fuel: This alert is triggered when the fuel is less than the liters defined as value. A notification can be received as a action whenever the alert is triggered.
Fuel Data Interruption: When the fuel hardware is damaged or interrupted, the alert will be triggered. Whenever the voltage value is less than the defined value for more than the defined time period, it will be considered as damaged/interrupted. A notification can be received as a action whenever the alert is triggered.
Fuel Impurity: This alert will be triggered whenever there is some impurity found in fuel like water, etc. The alert is fuel sensor specific and a notification can be received as a action whenever the alert is triggered.
Fuel Pilferage: This alert is triggered in case of theft. The alert is based on the threshold set as drain difference in fuel calibration. A notification can be received as a action whenever the alert is triggered.
Fuel Refill: This alert is triggered in case of refill. The alert is based on the threshold set as fill difference in fuel calibration. A notification can be received as a action whenever the alert is triggered.
Fuel Sensor Disconnect: This alert is triggered when the fuel sensor gets disconnected based on the fuel calibration settings. It notifies users with a message to check the sensor connection and supports SMS, email, and API notifications.
Fuel Sensor Error: This alert is triggered based on specific error codes from the fuel sensor data, indicating issues like faulty sensors, incorrect calibration, or water in the fuel tank. It generates notifications via SMS, email, or API as per configuration.
Fuel Sensor Shielded: This alert is triggered when a fuel sensor is covered or tampered with. It monitors specific ports and generates notifications if tampering is detected, supporting SMS, email, and API notifications.
G-Sensor: This alert will be triggered when there is some violation in the Gravity sensor. It is a device specific alert and a notification can be received as an action whenever the alert is triggered.
Gate Valvule: It is a Client specific alert.
Geofence Overcrowding: This alert will be triggered when the number of vehicles exceeds the limit set in the selected geofence area. A notification action can be received whenever the alert is triggered.
GPS Geofence: This alert will be triggered when a vehicle enters or exits the geofence area. It is device-specific, as the geofence list has been added to the device.
It is a device specific alert and a notification can be received as an action whenever the alert is triggered.
GPS Towing: This alert is triggered when a vehicle is towed. It is a device specific alert and a notification can be received as an action whenever the alert is triggered.
GSM Signal Loss: This alert is triggered when the GSM signal is lost due to network issues, prompting the device to send an event. It is a device specific alert and a notification can be received as an action whenever the alert is triggered.
Harsh Acceleration: This alert can be triggered in two ways:
- Event: In the event-based triggering, it relies on the magnitude received from the device, with custom considerations for magnitude if specified.
- Custom: in the custom-based triggering, it's only dependent on the magnitude received from the device. A notification action can be received whenever the alert is triggered.
Harsh Braking: In the event-based triggering, it relies on the magnitude received from the device, with custom considerations for magnitude if specified, and if it exceeds the set speed limit. In the custom-based triggering, it's only dependent on the magnitude received from the device and if it exceeds the set speed limit. A notification action can be received whenever the alert is triggered.
Harsh Cornering: This alert is activated when a vehicle makes sharp turns while driving. It is a device specific and a notification can be received as an action whenever the alert is triggered.
Help: This alert, specific to personal trackers, allows for starting, cancelling, or both actions. It is a device specific alert and a notification can be received as an action whenever the alert is triggered.
Humidity: The alert is triggered when the humidity sensor detects humidity levels beyond the configured range. A notification action can be received whenever the alert is triggered.
Idle: The alert will triggered when the vehicle remains idle for a duration exceeding the specified time period. A notification action can be received whenever the alert is triggered.
Ignition/ACC: The alert activates when the ignition is turned on, off, or both. A notification action can be received whenever the alert is triggered.
Immobilize: The alert is triggered when the immbolize is on, off, or both. A notification action can be received whenever the alert is triggered.
Immobilize Movement: The alert is triggered when the vehicle moves above the set speed limit despite being immobilized. A notification action can be received whenever the alert is triggered.
Inactive: The alert is triggered when the vehicle status changes to inactive. A notification action can be received whenever the alert is triggered.
Incorrect Ignition: The alert is triggered when the vehicle is moving at the specified speed for a duration longer than the defined time period while the ignition is off. A notification action can be received whenever the alert is triggered.
Jamming: The alert is activated when the GPS signal is shown off due to a jammer. It is device specific alert and a notification can be received as an action whenever the alert is triggered.
Job: The alert triggers when a job is created for both the company and the driver. A notification action can be received whenever the alert is triggered.
Job Arrival: The alert triggers when the vehicle arrives at the last point of the job early, delay, or both than the scheduled arrival time. A notification action can be received whenever the alert is triggered.
Job Departure: The alert triggers when the vehicle arrives at the first point of the job early, delay, or both than the scheduled departure time. A notification action can be received whenever the alert is triggered.
Job Route Deviation: The alert is triggered when the vehicle deviates from the predefined route, either based on distance(m) or duration(min). A notification action can be received whenever the alert is triggered.
Job Status: The alert is triggered when a job starts or ends. A notification action can be received whenever the alert is triggered.
Job Unauthorized Halt: The alert is triggered when the vehicle remains stationary/ take halt beyond defined checkpoints for a specified duration. A notification action can be received whenever the alert is triggered.
Late Start: This alert is triggered if a vehicle does not turn on its ignition within a specified time window each day. Users can configure the start time and a buffer duration (5 to 60 minutes). Notifications are sent via SMS, email, or API when the vehicle fails to start on time.
Light Alarm: It is device specific link.
Location: The alert will triggered when Location will be sent as an alert based on the schedule selected (Single/ Multiple). A notification action can be received whenever the alert is triggered.
Man down: This is a device specific alert (personal trackers) and the alert is generated when the man fallen down.
Moving: The alert activates when the vehicle is in the movement with speed. A notification action can be received whenever the alert is triggered when moving is on, off or both.
Night Driving: The alert is activated when a vehicle moves during night-time within a specific duration either in an authorized or unauthorized area. A notification action can be recieved whenever the alert is triggered.
Nonstop Drive: The alett is activated when a vehicle moves non stop without taking any stoppage based on duration or distance. A notification action can be recieved whenever the alert is triggered.
Off Route: The alert is activated when a vehicle deviates from the predefined route format. A notification action can be received whenever the alert is triggered.
Out Of Geofence: The alert is activated when a vehicle moves out of specific geofence area. A notification action can be recieved whenever the alerts is triggered.
Over Speed: The alert is activated when a vehicle exceeds the speed limit for a specified duration of time. A notification action can be recieved whenever the alerts is triggered.
OverStay: The alert is activated when a vehicle exceeds the speed limit for a specified duration of time. A notification action can be recieved whenever the alerts is triggered.
Overtime Drive: The alert will triggered when it has been configured based on distance and duration. A notification action can be received whenever the alert is triggered.
Overweight: It's a weight sensor, the alert get activated when a specific vehicle exceeds its weight capacity. A notification alert can be recieved whenever the alert is triggered.
Passed Address: The alert activates when a vehicle passes through its designated POI address. A notification alert can be recieved whenever the alert is triggered.
Passenger Seat: This digital port configured by a sensor is used to detect whether someone is seated beside it or not. A notification alert can be recieved whenever the alert is triggered.
Power: The alert is triggered when there is a disruption in the device's power port, typically caused by someone cutting the wire. This sensor-based alert indicates a disconnect or connect or always event. Notifications can be received whenever the alert is triggered.
Power off: It is a device specific alert. The alert is sent from device event itself. Notifications can be received whenever the alert is triggered.
Proximity Violation: This alert is specific to the device and is activated when a vehicle approaches a designated object, based on sensor-based configuration. Notifications can be received whenever the alert is triggered.
Reached Address: The alert is triggered when a vehicle arrives at a specific POI address. A notification alert can be recieved whenever the alert is triggered.
Reverse: The alert is activated when a vehicle reverses, triggering an alert in case of any incidents. A notification alert can be recieved whenever the alert is triggered.
RFID: The alert is activated when a vehicle is authorized or unauthorized or both via RFID detection. A notification alert can be recieved whenever the alert is triggered.
Seat Belt: The alert is digital and monitors whether the driver is wearing a seatbelt or not. A notification alert can be recieved whenever the alert is triggered.
Sharp Left Turn: The alert is triggered when a vehicle makes a sharp left turn. It is a device-specific event. A notification alert can be recieved whenever the alert is triggered.
Sharp Right Turn: The alert is triggered when a vehicle makes a sharp right turn. It is a device-specific event. A notification alert can be recieved whenever the alert is triggered.
Ship Engine 3: The alert is a digital port configured for ships. It is a sensor-based configuration that detects when the engine starts or stops. The alert can be triggered based on the start, stop, or both events. A notification alert can be recieved whenever the alert is triggered.
Sim Change: The alert is triggered when the SIM card is changed in the device. It is a device-specific alert. A notification alert can be recieved whenever the alert is triggered.
SOS: The alert is triggered when a panic alert is generated. It is configurable through sensors. A notification alert can be recieved whenever the alert is triggered.
Speedometer Tampering: The alert is triggered when there is tampering with the speedometer, indicating whether it's on, off, or both. A notification alert can be recieved whenever the alert is triggered.
State Border Crossing: The alert is triggered when a vehicle crosses the state border, prompting an address alert. A notification alert can be recieved whenever the alert is triggered.
Stay Away from Zone: The alert is triggered when a vehicle approaches a geofence area where it is restricted from entering. A notification alert can be recieved before reaching the geofence. whenever the alert is triggered.
Stay in Zone: The alert is triggered when a vehicle exits a designated geofence area where it is required to remain. A notification alert can be recieved before leaving the geofence. whenever the alert is triggered.
Sweeper: It is a digital port alert indicating the status of the sweeper machine, whether it is on or off. A notification alert can be recieved whenever the alert is triggered.
System 3.5: It is a customer specific alert.
Tamper: The alert is triggered in case of GPS tampering, signaling if the device enclosure has been on or off or both with fraudulently.
Tank Lid: The alert is activated by a digital sensor indicating when the tank lid is opened or closed. A notification alert can be recieved whenever the alert is triggered.
Temperature: The alert triggers when the temperature exceeds the value set limit. A notification alert can be recieved whenever the alert is triggered.
Tow: The alert is triggered when the vehicle is towed with the ignition off. This alert is based on device logic. A notification alert can be recieved whenever the alert is triggered.
Travel Distance: The alert is triggered when the vehicle covers a specific distance limit. A notification alert can be recieved whenever the alert is triggered.
Underweight: It's a weight sensor, the alert get activated when a specific vehicle falls below its weight capacity. A notification alert can be recieved whenever the alert is triggered.
Vehicle Low Battery: The alert is triggered by the internal battery, when the battery level drops below a certain threshold, an alert is generated. A notification alert can be recieved whenever the alert is triggered.
Vibration: The alert is triggered when the vehicle experiences vibrations, such as impacts or collisions, which are event-specific. A notification alert can be recieved whenever the alert is triggered.
Zone OverSpeeding: The alert is triggered when the vehicle exceeds the set speed limit within a geofenced area of particular zone, indicating zone overspeeding. A notification alert can be recieved whenever the alert is triggered.