The Hijack Sensor is used to detect Hijack events from the connected device. It allows the system to trigger alerts whenever the configured Hijack Sensor is activated. This helps notify the vehicle owner or fleet manager during emergency or unauthorized situations.
Before You Get Started
- Log in to your account.
- Go to Settings > General > Object.
- Double-click on the record for which you want to configure the Buzzer.
To Get Started
- Navigate to the Sensors tab.
- Activate the digital port connection type by clicking on the checkbox given in the Active column.
- User can select the dedicated Hijack port (device dependent) in the list or user can connect it on digital input port as well.
- In Connected Sensor select Hijack.
-
Reading Type: This setting determines how the received data is displayed in the system.
- Direct: The system displays the data exactly as it is received from the sensor.
- Inverse: The system displays the opposite of the received data (e.g., ON becomes OFF and OFF becomes ON).
Please Note: Select the appropriate option based on how you want the sensor data to be interpreted and shown in the system.
- Save the configuration by clicking on the Save 💾 icon.
Please Note:
-
Users can configure the Hijack alert to get notified about the event.