Fuel Impurity

The Fuel Impurity alert is triggered whenever impurities are detected in the fuel, such as water or other contaminants.
This alert helps fleet managers identify potential fuel quality issues early, preventing damage to the vehicle’s engine or fuel system and ensuring operational reliability.

Parameters Considered (Prerequisites)

• Fuel Level: The Fuel Sensor attachment and calibration is required in order for the fuel alert to be triggered. 

How to Configure

1. Select the correct Company and Branch for whom the alert is to be configured.
2. Based On: Choose on what you want to base the alert configuration (Object, Object Group, Object Type).
   1. Object: Select individual vehicles for whom you want the alert to generate.
   2. Object Group: Select a group of vehicles for whom you want the alert to generate.
   3. Object Type: Select vehicle or object type for whom you want the alert to generate.
3. Select the Object based on the previous step selection.
4. Set an Alert Name for identification of the alert.
5. Select the Alert Type as Fuel Impurity.
6. Select No of Alerts, from Single or Multiple.
   1. Select Single, if you want to receive one alert per sensor.
   2. Select Multiple, if you want to receive multiple alert per sensor.

7. In the Text field, enter the message that will be displayed when the alert is triggered.

8. Select the Valid Days, Everyday or Custom. 
   1. Everyday: This alert will be triggered, everyday in case of a violation in accordance to these parameters set.
   2. Custom: Mark the checkboxes of the days, when you want this alert to be triggered for. (eg., Sun, Mon and Sat)
      
9. Enter the Valid Time From and To. The alert will be generated inside the time range that you have selected.
10. Select the Timezone.
11. Select the Severity of the alert (Low, Medium, or High).
12. Mark the checkboxes of the medium via which you want the Action or Notification to be sent. (eg., SMS, Email or Notification)
    
    1. SMS: To receive an alert by SMS, enable the checkbox, enter the phone numbers.
    2. Email: To receive an alert by Email, enable the checkbox, enter the recipients of the email.
    3. Notification: To receive an alert on the system Push Notification, enable checkbox, and select the notification tone. you’ll receive notifications according to the Severity Set i.e Low, Medium or High.
13. Click Save 💾 icon. to save the alert configuration.

Example